Double R Consol Ltd
Slitting Machines Rewinding Machines Core Cutters Hot Stamping Foil and TTR Slitters Special Purpose Machines Coating and Laminating Machines Shaftless Unwind Units Alan Duffy Engineering (A.D.E.) Request More Information
Home Contact Us About Us News Double R Controls Ltd Double R Consol Ltd Double R Henderson Ltd
Technical Information Brochures and other Literature Job Opportunities

Slitting Machines, Slitter Rewinders


DC-450 Slitter Rewinder   DCS-1000 Duplex Centre Surface Slitter Rewinder

DC-450 SLITTER REWINDER:

Slitter rewinder for holographic films and foils, this particular unit is supplied with a separate unwind which incorporates web inspection and slice facility, an operator access platform allows easy and ergonomic setting of slitting knives razor and shear blades.

Rewinding can be onto 25 mm or 76 mm locked core shafts, and when slitting down to 6 mm widths rewinding is done on the Double R Consol specially designed differential rewind shafts. Rewind lay-on rollers are either contact or controlled gap dependent upon material selection. The rewind arms retract on one side to allow the cantilevered shafts to be accessed easily for roll removal.

 

DCS-1000 CENTRE-SURFACE SLITTER REWINDER:

Duplex centre-surface slitter rewinders, a standard range of machinery generally for larger diameter rewind rolls, supplied in sizes 1000 mm up to 3500 mm wide dependent on applications, rewind diameter 1000mm, will usually require an overhead lifting device for offloading of finished rolls.
 
DCS-1100 Duplex Centre Surface Slitter Rewinder   DCS-1100 Duplex Centre Surface Slitter Rewinder

DCS-1100 DUPLEX CENTRE-SURFACE SLITTER REWINDER:

Duplex Centre-Surface slitter rewinder supplied with mother roll grab manipulator for lifting, turning, and presentation of mother roll. Unwind unit with web inspection, splice table, slitting & dual centre-surface rewinding stations. Off load by overhead hoist with motorised traverse, and finished rolls upended onto pallet ready for transportation. System conceived, designed, and manufactured by Double R Consol Ltd.

 

DCS-1100 DUPLEX CENTRE-SURFACE SLITTER REWINDER:

Duplex Centre-surface slitter rewinder with the facility to control gap rewind, effectively keeping the slit coils as close as possible to the main drum roller without physical contact, beneficial when slitting narrow width coils which for reasons of stability of danger of scratching cannot be surface drive assited, product pictured is adhesive coated foam rubber.

 
DCS-1250 High Speed Slitting and Rewinding Machine   DCS-1300 Standard Centre Surface Slitter Rewinder

DCS-1250 SLITTER REWINDER:

High speed slitting and rewinding machine with fully automatic knife setting system, integral semi-auto finished roll wrapping system, speeds up to 800 mpm, has a web width of 2000 mm and rewind roll capacity of 1200 mm.

 

DCS-1300 DUPLEX CENTRE-SURFACE SLITTER REWINDER:

Standard duplex centre-surface slitter rewinder for nonwoven products, this unit was supplied with hardened anvil drum roller and pneumatically operated crush cutting knives.

 
DCS-650 Duplex Centre-Surface Slitter Rewinder   ICS-800 Individual Rewind Arm Centre Surface Slitter Rewinder

DCS-650 DUPLEX CENTRE-SURFACE SLITTER REWINDER:

A duplex centre-surface slitter rewinder specifically designed for cigarette tissue paper, shear slitting, fish tail venturi trim system, shaftless unwind, web width 2200 mm x rewind diameter 650 mm at speeds up to 500 mpm.

 

ICS-800 CENTRE-SURFACE SLITTER REWINDER:

Individual rewind arm centre-surface slitter rewinder, this particular machine was supplied for the conversion of large rolls of siliconised papers, solvent and solvent free. The machine is overhead fed to give access to the second rewind station for removal of the finished roll. The specification allows for a max web width of 250 mm, speeds up to 500 mpm, rewind roll max diameter 800 mm.

 
SCS-1200 Simplex Centre Surface Slitter Rewinder   DCS-200 Duplex Centre-Surface Slitter Rewinder

SCS-1200 SIMPLEX CENTRE-SURFACE SLITTER REWINDER:

Simplex centre-surface slitter rewinder, for papers, boards and nonwovens, machine shown has a web width of 2200 mm and a rewind capacity of 1200 mm, crush cutting against a hardened anvil drum roller, standard speed 300 mpm.

 

DCS-200 DUPLEX CENTRE-SURFACE SLITTER REWINDER:

Double R Consol has introduced into its wide range of slitting machines a super precision Centre Surface slitting machine incorporating cantilevered rewind mandrels for optimum user friendly operation. The equipment is designed for processing highly sensitive materials such as micro porous products or thin gauge (6 micron polyester webs).

To request further information, please call us on +44 (0)1706 623625, e-mail sales@drc.co.uk, or alternatively use our online contact form.

Our full contact details including our address, map and various telephone numbers can be found here.



Contact UsAbout UsNewsBrochuresTechnical InfoDouble R ControlsDouble R ConsolDouble R HendersonSite MapJob Opportunities •   © 2007-2014 Double R Controls Ltd.